SICK WE5-N132 through-beam photoelectric sensor, rectangular housing, 100 mA max output, light/dark switching, used condition.
| Parameter | Value |
|---|---|
| Model | WE5-N132 |
| Parameter | Value |
|---|---|
| Type | Through-Beam Photoelectric Sensor |
| Parameter | Value |
|---|---|
| Switching Mode | Light/dark switching |
| Condition | Used |
| Parameter | Value |
|---|---|
| Weight | 0,07 kg |
| Housing | Rectangular |
| Shelf no. | 230620 |
| Output current | 100 mA max |
| Type of product | Through-Beam Photoelectric Sensor |
The SICK WE5-N132 is a through-beam photoelectric sensor in a rectangular housing, rated for 100 mA max output current with light/dark switching capability.
The 100 mA output current is typical for photoelectric sensor switching outputs — sufficient to drive a PLC input or a small relay directly. Light/dark switching gives flexibility to configure the output state for either presence or absence detection.
WE5-N132 is sourced through independent distribution channels. Volume pricing and availability are confirmed at quote time against an RFQ.
The WE12-P4381 is a through-beam photoelectric sensor with a similar 100 mA output and visible red LED, but it uses a metal zinc diecast housing and M12 connector, while the WE5-N132 has a rectangular housing. Wiring differences mean a panel designed for WE12-P4381 may need adapter cables or terminal changes.
The listed type is Through-Beam Photoelectric Sensor.
The listed model is WE5-N132.
No — the WE5-N132 has a rectangular housing, while the WE12-P4381 uses a metal zinc diecast housing with an M12 connector. The mounting footprint and connection type differ, so rewiring or adapter hardware is required.
The evidence does not list specific compliance documents (RoHS, REACH, UL, IEC) for this unit. For a used part, documentation may be limited to the original manufacturer datasheet.
No related articles