2.4 Nm continuous, 0.75 kW at 3000 rpm on the 380–480 V bus
The Siemens 1FK2104-5AF00-0MA0 is a SIMOTICS S-1FK2 HD synchronous servo motor rated for a continuous stall torque M0 of 2.4 Nm, with a rated power PN of 0.75 kW at a nominal speed nN of 3000 rpm on a 380–480 V supply, and PN of 0.375 kW at nN of 1500 rpm on a 200–240 V supply. That two-voltage rating profile is deliberate: the same frame drives the low-voltage SINAMICS S210 line and the higher-voltage 400 V-class converter without a hardware swap, so the BOM holds one motor SKU across mixed-voltage cells. The motor belongs to the 1FK2 servomotor family for the SINAMICS S210 drive system, meaning the winding, encoder and connector pinout are matched to that drive platform — a commissioning tech should expect the S210 auto-configuration routine to recognise the motor on first connect without manual parameter entry.
Encoder, shaft and IP64 sealing for washdown-adjacent cells
Feedback is an absolute encoder AM22DQC, 22-bit single-turn plus 12-bit multiturn, which eliminates the homing routine on power-up and gives the S210 drive an absolute position the first time the bus comes up — relevant for changeover-heavy lines where every minute of homing time is throughput. The output end is a cylindrical shaft D19x40 mm, and the body carries degree of protection IP64 with an OCC interface and a rotatable M17 plug connector. IP64 means the motor is sealed against splashed water and dust ingress, so the unit is acceptable for wet-side conveyor or filling-line zones where hosed-down cleaning is routine, though it stops short of full immersion duty.
Lifecycle status and built-to-order commercial class
The commercial class is C: products manufactured / produced to order, which cannot be reused or re-utilized or returned against credit, with a quantity unit of one piece. That class has direct stocking consequences — the motor is built against the purchase order rather than pulled from finished inventory, so lead time and pricing are confirmed per RFQ rather than off a price-list shelf.
Compliance and ordering metadata on file
RoHS compliance has been in force since 01-07-06 and the supplier carries the REACH Art. 33 duty to inform against the current candidate list, so the motor is acceptable for sale into the EU market without additional substance-restriction paperwork from the buyer. Export control is classified AL:N / ECCN:N_CNDU, meaning the part is not subject to a U.S. export licence for general commercial destinations. Order processing uses Group Code R220 and Product Group 9021; packaging is one piece per shipment with outer dimensions 452.00 x 250.00 x 267.00 mm.