Carton-size footprint, panel-side reality
The 1FK2104-5AF10-0MA0: The motor ships in a 452.00 x 250.00 x 267.00 mm carton as a single-piece unit — fractional-horsepower servo crates eat shelf and pallet space at a different ratio than the device itself suggests, so bin and bench clearance has to be planned around the box, not just the motor flange. Output is paired with a cylindrical shaft D19x40mm and a holding brake; the encoder is the 22-bit + 12-bit multiturn AM22DQC over the OCC interface, with the M17 connector rotatable for cable routing. IP64 means the motor body tolerates splash and dust ingress, but does not survive washdown — build the cabinet or shroud accordingly when the line is wet-side.
Two torque/speed ratings, one drive family
Stall torque is M0=2.4 Nm, with two rated points on the nameplate: PN=0.75 kW at nN=3000 rpm from a 380-480 V supply, and PN=0.375 kW at nN=1500 rpm from a 200-240 V supply. The motor is designed for the SIMOTICS S-1FK2 family paired with SINAMICS S210 — drive sizing follows the lower of the two rating points you actually wire it to, not the headline 0.75 kW figure.
Compliance file the buyer expects on the quote
Export control is AL:N / ECCN:N_CNDU, so cross-border shipments do not trigger an ECCN licensing gate on this order code.