2.4 Nm continuous, 0.75 kW at 3000 rpm in the 1FK2 CT frame
The Siemens 1FK2204-5AF00-2SA0 is a SIMOTICS S-1FK2 CT servomotor sized into the lower end of the 1FK2 family: 2.4 Nm static stall torque, 0.75 kW rated mechanical output at nN=3000 rpm on a 380-480 V supply and 0.375 kW at nN=1500 rpm on a 200-240 V supply, paired with a 22-bit single-turn absolute encoder (AS22DQC) and an OCC interface through an M17 rotatable plug. It belongs to the 1FK2 servomotor family intended for the SINAMICS S210 drive platform, which is the integration context that drives the encoder choice, the M17 connector family, and the commutation interface — ordering this motor against a non-S210 drive line means re-checking the encoder protocol at the controller side.
Mechanical envelope and IP64 duty
The shaft is cylindrical, 14 mm diameter by 30 mm length, and the housing carries IP64 protection — sufficient for cabinet-internal mounting and lightly dusty industrial cells, but not a washdown or outdoor rating, so a sealed enclosure or shroud is the integrator's call when the drive sits near coolant, splash, or food-grade cleaning. Packaging is one piece per shipper at 452.00 x 250.00 x 267.00 mm, which is the figure to feed the receiving dock when the order arrives rather than a selection parameter — fit decisions on this frame come from the shaft detail and the M17 connector orientation, not the outer carton.
Compliance posture and order class
The motor carries RoHS compliance since 01-07-06 and falls under REACH Art. 33 information duty, so the shipping paperwork for an EU-bound shipment includes the candidate-list substance declaration referenced through Siemens' Reach Information channel. Export control is AL:N / ECCN:N_CNDU, meaning no special export licence gate on the standard commercial route; the product class is C — built to order, non-returnable for credit — which the procurement side should bake into the PO terms rather than treating as a stocked catalogue line.
Lifecycle read for the BOM line
Lifecycle stage reads as current and the product status is Active, so this is a live BOM line on the 1FK2 platform rather than a last-time-buy window — the procurement decision is about lead time on a built-to-order slot, not about securing final-batch inventory. Group code R220 and product group 9021 are the internal Siemens classification fields the buyer's SAP or MDM record maps against; they confirm this order code sits in the standard 1FK2 servomotor group rather than a regional or pre-release variant.