What 1FK2204-5AK10-1MA0 is, in one paragraph
The Siemens 1FK2204-5AK10-1MA0 is a SIMOTICS S-1FK2 CT servo motor from the 1FK2 family built for SINAMICS S210 drive electronics — a compact servo with holding brake, IP64 protection on the body, an AM22DQC 22-bit + 12-bit multiturn absolute encoder, and an OCC interface that plugs in via a rotatable M17 connector. Stall torque M0 = 2.4 Nm; rated power PN = 0.57 kW at nN=6000 rpm on a 380-480 V supply, or PN = 0.75 kW at nN=3000 rpm on a 200-240 V supply — so the same motor frame covers both the European 400 V class and the lower-voltage 230 V class drives without a hardware change. Shaft is D19 x 40 mm with feather key, degree of protection IP64, and the encoder is wired through a rotatable M17 plug — meaningful in a panel build because the connector orientation can be set after the motor is bolted down, which removes one of the usual clearance call-outs at the cable gland.
Lifecycle, compliance, and what the order code carries
carries productStatus=Active, and the Siemens product class on this line is class C — manufactured to order, not returnable against credit — so the BOM needs a real quantity under it before release. Compliance stack is documented: RoHS conformity since 01-07-06, REACH Art. 33 candidate-list duty-to-inform flagged in the part record, and export-control class AL:N / ECCN:N_CNDU so the order travels without a specific licence posture. Group Code R220 and Product Group 9021 are stamped on the line — the same identifiers an SAP / Siemens ordering system expects to see on the PO for an automated match into the build schedule. Packaging is one piece per ship-out, with outer dimensions 452 x 250 x 267 mm — single-unit pack, not a multi-pack, so spare-part orders sit at quantity one on the RFQ.
What matters when you specify this motor into a line
The 2.4 Nm stall torque and 0.57 kW rating at 6000 rpm put this motor in the small-format SINAMICS S210 envelope — typically paired with positioning axes where a holding brake is required to hold a vertical load during a power-loss event, and the AM22DQC absolute encoder keeps the absolute position across that same power-loss event without a homing routine. IP64 is a dust-and-splash rating, not a washdown rating — for food-and-beverage or outdoor conveyor builds, a higher-IP variant in the same 1FK2 family is the correct substitution, not an attempt to push this motor past its enclosure rating.