Skip to main content
Siemens 1FK2204-5AK11-1MB0 — Servo Motors with Brake

Siemens 1FK2204-5AK11-1MB0, 2.4 Nm servo motor with brake

MPN1FK2204-5AK11-1MB0
Active

Siemens SIMOTICS S-1FK2 CT servo motor, 2.4 Nm, 0.57 kW at 6000 rpm (380-480 V) / 0.75 kW at 3000 rpm (200-240 V), with holding brake, absolute encoder AM22DQC, DRIVE-CLiQ, IP65, order code 1FK2204-5AK11-1MB0.

StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Specifications

1FK2204-5AK11-1MB0 — Specifications
ParameterValue
Group codeR220
Product group9021
Product classC: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.
Series1FK2 servomotors for SINAMICS S120
Export control regulationsAL : N / ECCN : N_CNDU
Compliance with the substance restrictions according to RoHS directiveSince: 01-07-06

Product details

What the 1FK2204-5AK11-1MB0 is built for

The 1FK2204-5AK11-1MB0 is a SINAMICS S120-matched servo motor in Siemens' compact SIMOTICS S-1FK2 CT line — 2.4 Nm holding torque with a spring-applied holding brake that holds the axis when the drive de-energises, which is the standard arrangement for any vertical load that must not drop on power loss. Rated 0.57 kW at 6000 rpm on 380-480 V three-phase and 0.75 kW at 3000 rpm on 200-240 V — the power figure changes with supply voltage because the motor is driven within the SINAMICS S120 inverter envelope, not direct-on-line. The AM22DQC absolute encoder delivers 22-bit single-turn resolution plus 12-bit multiturn, giving 4,096 revs of position memory before roll-over — enough for most rotary table and indexing axis applications without a homing cycle on every power-up. DRIVE-CLiQ is the digital serial bus that carries motor identity, encoder position, and temperature data back to the SINAMICS S120 control unit over a single M17 plug — the drive recognises the motor model and its parameters automatically on first boot, which eliminates one class of commissioning error on a machine retrofit. IP65 sealing means the motor body tolerates dusty and splash-prone environments — suitable for the outside-the-cabinet zone on a packaging line or a woodworking machine where coolant mist is present, provided the cable-entry side is properly sealed with a matching M17 cordset.

Made-to-order: what Class C means for your procurement

This order code carries Product Class C — manufactured to order, which means Siemens builds each unit against the purchase order and cannot reuse, re-utilise, or credit a returned unit. Export control classification is AL:N / ECCN:N_CNDU — no dual-use restriction applies, which simplifies procurement logistics for most industrial end-users.

Compliance and documentation

RoHS compliance is confirmed from 01-07-06, and REACH Article 33 duty-to-inform is flagged on the Siemens record — the full substance declaration is available through the Siemens Industry Online Support portal.

Frequently asked questions

What is the group code for the 1FK2204-5AK11-1MB0?

The listed group code is R220 — this is the Siemens internal ordering and logistics reference for this servo motor variant, used when placing orders through authorised Siemens distribution channels.

What does the 8 kHz / 62.5 µs switching restriction mean?

The motor is validated only for operation with SINAMICS S120 drive systems running at 8 kHz PWM carrier frequency and 62.5 µs base cycle time — this is the Siemens-recommended switching mode for the S-1FK2 CT series. Running at a different switching frequency may affect electromagnetic compatibility, bearing currents, and encoder signal integrity, so the drive parameters must match this profile before commissioning.

MPN
1FK2204-5AK11-1MB0