3.2 Nm / 1 kW — what the headline numbers decide
The 1FK2204-6AF00-0SB0 is a SIMOTICS S-1FK2 CT servo motor sized for 3.2 Nm continuous stall torque and 1 kW rated power at 3000 rpm when fed from a 380–480 V drive, with a half-power point of 0.5 kW at 1500 rpm on a 200–240 V stage — so the same frame covers both the 230 V class and the 400/480 V class line-ups without a re-spec. DRIVE-CLiQ on the M17 plug and the absolute single-turn 22-bit encoder (AS22DQC) make this a native fit for a SINAMICS S120 drive-cliq ring — commissioning lands as an automatic topology read rather than a manual parameter hand-shake.
IP64 shaft seal and M17 power connector for panel-side integration
IP64 at the housing and the cylindrical D19x40 mm shaft land this motor in cabinet-mounted or light-dust conveyor and packaging-machine service — not washdown, but tolerant of the dry factory ambient most S120 cells live in. Power connector size M17 alongside the DRIVE-CLiQ M17 means one connector family handles both power and feedback — cable routing on the machine stays clean and the spares kit only carries one mating-cable part number.