Sizing the drive axis at 1 kW
Siemens 1FK2204-6AF00-1SA0 sits in the SIMOTICS S-1FK2 CT family sized for SINAMICS S210 drives, with a 3.2 Nm stall torque and 1 kW rated power at 3000 rpm on a 380-480 V bus, derating to 0.5 kW at 1500 rpm when the line is 200-240 V. The motor carries a single-turn 22-bit absolute encoder (AS22DQC) and an OCC interface on a rotatable M17 plug, so commissioning needs the S210 drive family on the other end of the cable — pairing a 1FK2 with anything outside S210 is not the supported path. IP64 and a D19x40 mm feather-key shaft mark this as a panel-side mounting where the motor stays inside an enclosure or a guarded machine frame, not on a washdown line — water-ingress protection is at the splash/dust level rather than immersion.
Production status and BOM discipline
Lifecycle is logged as current and product status as Active, so the BOM line is not in a last-time-buy window today. The class field flags these 1FK2 motors as made-to-order stock that cannot be returned against credit, which is the cost-engineering catch — there is no cancellation refund and no returns credit, so volume commitments are firm once placed. Compliance packaging is clean: RoHS since 01-07-06 and REACH Art. 33 disclosure carries the standard Reach Information note, no restricted-substance flag. Export classification is AL:N / ECCN:N_CNDU, so the part is not on the controlled-destination list and ships under standard industrial distribution paperwork.