Production status and what it means for the BOM
The 1FK2204-6AF00-2SB0 carries a current lifecycle status, which means Siemens still manufactures it against order rather than holding finished-goods stock at the factory channel. Sourcing through independent distribution for this code means quoted-to-order against the BOM quantity — lead time and unit price confirmed at RFQ. The product is classed as built-to-order — non-returnable, non-reusable, produced per configuration — which is consistent with a configured servo motor carrying a specific encoder option, shaft geometry, and connector set rather than a shelf item.
Motor rating, encoder, and drive interface
Stall torque M0 = 3.2 Nm with a rated power PN = 1 kW at nN = 3000 rpm on a 380-480 V supply, and PN = 0.5 kW at nN = 1500 rpm on a 200-240 V supply. That dual-voltage rating matters for cabinets running a 230 V drive section as well as the common 400 V SINAMICS S120 line — the same motor frame covers both without a re-spec. The feedback is an absolute encoder single-turn 22-bit (AS22DQC) and the motor carries a DRIVE-CLiQ plug M17 plus a power connector size M17. DRIVE-CLiQ is the native digital interface to a SINAMICS S120 — encoder data, temperature, and nameplate parameters are auto-loaded into the drive on first connection, so commissioning does not require manual parameter entry of the motor ID. Mechanical interface is a cylindrical shaft D14 x 30 mm, degree of protection IP64. IP64 is dust-tight and splash-resistant from any direction but not rated for washdown or high-pressure jets — confirm the cabinet or machine-side environment before specifying on a wet or food-grade line.
Compliance package on record
RoHS conformity is declared since 01-07-06 and REACH Article 33 duty-to-inform applies per the current candidate list — both are the substance-restriction statements expected for a part shipping into the EU. Export control is AL:N / ECCN:N_CNDU, meaning no special licence is triggered for standard commercial export of this code.
Procurement coding and packaging
Siemens internal coding places the motor under Group Code R220 and Product Group 9021, supplied as one piece per pack in a 452 x 250 x 267 mm carton. Single-piece packaging confirms this is a configured-to-order item rather than a multi-pack shelf SKU.