3.2 Nm continuous, 1 kW at 3000 rpm with a holding brake
The 1FK2204-6AF10-2MA0 is a SIMOTICS S-1FK2 CT servo motor from the 1FK2 servomotor family built for SINAMICS S210 drives, rated M0=3.2 Nm with PN=1 kW at nN=3000 rpm on a 380–480 V supply and PN=0.5 kW at nN=1500 rpm on a 200–240 V supply. It ships with an integrated holding brake, an IP64 housing, a cylindrical D14 x 30 mm shaft, an absolute encoder AM22DQC (22-bit singleturn + 12-bit multiturn) with OCC interface, and a rotatable M17 plug for the power and signal connection.
Two voltage rails, one part — sizing it on the right supply
The motor's continuous power rating depends on which SINAMICS S210 bus the cabinet builder wires it to: 1 kW at 3000 rpm on the 380–480 V three-phase rail, or 0.5 kW at 1500 rpm on the 200–240 V rail — so the same order code covers both common industrial mains without a different SKU. That dual-rail spec is the lever for fit decisions: an integrator speccing a 200–240 V cabinet sees a half-kW continuous servo, while a 400 V-class machine reads 1 kW off the same nameplate — the holding brake and AM22DQC encoder are identical in both cases.
Compliance posture for the documentation pack
RoHS substance compliance has been declared since 01-07-06 and REACH Article 33 candidate-list information is published by Siemens, which is what a quality doc-control package needs to clear the substance-restriction gate. Export control is recorded as AL:N / ECCN:N_CNDU, so cross-border shipment does not require a license under that classification — useful for a parallel-import or repair-exchange route.
Receiving the carton
Each unit ships in a single-piece carton measuring 452.00 x 250.00 x 267.00 mm — one motor per box, so receiving should plan bench space and unboxing room accordingly rather than expecting a multi-pack.