1 kW / 3.2 Nm frame built around the S210 drive
The 1FK2204-6AF11-1SA0 sits in the SIMOTICS S-1FK2 CT family that pairs natively with the SINAMICS S210 single-cable servo drive, so the motor and drive share the OCC interface — one cable carries power, encoder feedback, and holding-brake control without a separate brake lead. The nameplate carries M0=3.2 Nm of static torque, with PN=1 kW at nN=3000 rpm on the 380-480 V rail and PN=0.5 kW at nN=1500 rpm on the 200-240 V rail — the higher-power figure only holds when the cabinet is wired to the 400 V class supply, so the panel builder has to confirm the line voltage before sizing the drive. For a plant-floor spare, this frame covers the common mid-range motion axis on packaging, dosing, and small-format machine builders — small enough to drop onto a linear slide or rotary table, but with the torque headroom for short accel bursts above rated load.
Encoder, brake, and IP65 build for line-side mounting
Feedback is the absolute single-turn 22-bit AS22DQC encoder — that resolution is enough for sub-arc-minute positioning without the cost premium of a multi-turn absolute, which is the usual pick on horizontal axes where absolute position on power-up is enough and vertical-axis memory isn't required. The integrated holding brake holds the axis when the drive is de-energized, so the same MPN works on vertical or inclined axes that need a fail-safe stop without an external pneumatic clamp — the brake is released through the OCC cable from the S210, no extra wiring. IP65 sealing on the housing plus a D19x40 mm keyed shaft means the motor lives directly in the line environment rather than behind a guard, and the M17 connector rotates so the cable exit can be clocked to the panel routing without straining the grommet.
Lifecycle, class C order policy, and compliance trail
Product class is C — manufactured to order with no re-use or return-for-credit, which is the standard posture for configured servomotors and matters for the storeroom: any surplus unit on the shelf is effectively job-lot stock, not a returnable line item. Compliance trail covers RoHS conformity since 01-07-06 and the REACH Art. 33 duty-to-inform statement; Group Code R220 and Product Group 9021 are the internal ordering keys that line up with the Siemens configurator and price list.
Sourcing posture for a made-to-order servo
Single-piece shipping carton is 452.00 x 250.00 x 267.00 mm, so receiving needs to plan the handling slot before the truck arrives — this is a bench-lift, not a shelf-drop unit. Order quantity is 1 Piece under Quantity Unit, with packaging quantity also 1; for a critical spare on a 1FK2 line, the MRO planner orders against a single BOM line and confirms the build at RFQ because configured servomotors don't sit in bulk shelf stock.