50 W on a 20 mm shaft height for S200 cabinets
The Siemens 1FL2102-2AF00-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family, sized for the SINAMICS S200 drive line — a 400 V 3AC supply, Pn = 50 W, Nn = 3000 rpm, with M0 = Mn = 0.16 Nm, a 20 mm shaft height, hybrid connector (AS), 21-bit feedback, plain shaft with N tolerance, and IP54 protection class without oil seal. Built as a matched set against the S200, the motor's rating envelope (50 W continuous at 3000 rpm) sits at the small-frame end of the family — appropriate for light auxiliary axes, indexing tables, and small-format feeders rather than main spindle duty. Lifecycle is recorded as Active and the product class is build-to-order — items are manufactured to specification and are not returnable for credit or re-use, which is normal for configured Siemens motion SKUs. The field on the record also reads current, matching the active status. Plain shaft, no holding brake, and IP54 without oil seal make this the configuration for clean-cabinet, horizontal-mount auxiliary motion where a separate brake isn't required on the load side. The 21-bit feedback path closes the position loop tightly back into the SINAMICS S200, so cyclic synchronization across axes on the same drive bus holds within the S200's distributed-clock budget rather than being limited by the motor's resolver resolution.
Compliance and catalog identifiers on file
Export-control status is AL:N / ECCN:N, i.e. not controlled, which simplifies cross-border paperwork on a parallel-import or service-spare shipment. These are the fields to quote when raising the BOM line or reconciling the nameplate against the purchase order.
Sourcing posture for an active build-to-order SKU
Because the product class is non-returnable, order quantity, voltage variant, connector orientation, and feedback resolution need to be locked before the PO is released.