50 W / 0.16 Nm in a 20 mm frame for SINAMICS S200
The 1FL2102-2AF10-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor built to pair with a SINAMICS S200 drive, supplied as 400 V 3AC with Pn = 50 W, Nn = 3000 rpm, and M0 = Mn = 0.16 Nm. The shaft height is 20 mm, the shaft is plain with tolerance N, and an integrated holding brake is fitted — the brake matters for any vertical or inertia-holding axis where the S200 must hold position with the bus de-energised. The encoder side carries an AM21bit absolute singleturn interface in a hybrid connector; combined with the SINAMICS S200 drive this closes the comms loop the way commissioning expects — no third-party cable conversion is needed for the matched drive. Protection class IP54 without oil seal is the rating on the nameplate; for a washdown or food-grade line the next-higher sealing spec is the part to compare against, not this one.
Built-to-order, non-returnable — what that means for your RFQ
Siemens classifies this line as product class C: manufactured or produced to order, not reusable, not returnable for credit. Practical effect — every BOM line carrying this MPN is a factory-configured build slot, so lead time and minimum order quantity are confirmed at quote time against the actual production schedule, not pulled from shelf stock. Lifecycle status is active and current. Compliance on the nameplate: RoHS conformity since 01-01-18, REACH Art. 33 duty-to-inform carried against the current candidate list, and export-control classification AL: N / ECCN: N.
Group R220 / Product Group X0DJ, packed one-up
Order admin reads Group Code R220, Product Group X0DJ, quantity unit 1 piece, packaging quantity 1. Carton footprint is 315 x 182 x 172 mm — a single pack, not a multi-up, which is what the product class implies for a built-to-order servo.