What the 1FL2102-2AF10-0SC0 is and where it sits
The 1FL2102-2AF10-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family, sized for direct pairing with a SINAMICS S200 drive on a 400 V 3AC supply rail and rated for 50 W continuous output at 3000 rpm, with 0.16 Nm holding and rated torque and a 20 mm shaft height. It ships with a holding brake for vertical-axis and zero-position hold requirements, plain shaft to tolerance N, and an IP54 enclosure without an oil seal — the configuration a small-format pick-and-place or indexing axis expects from this series. The product sits in Group Code R220 under Product Group X0DJ in Siemens' commercial classification, meaning it is ordered as a configured production item rather than a shelf-stock spare. Quantity unit is one piece per package, packed in a 315 x 182 x 172 mm shipper.
Wiring, commissioning interface, and what drives it
The motor carries a hybrid connector for power and feedback in one body — the AS21 bit absolute encoder feedback resolves position at the drive without an external battery box on the motor, and the hybrid connector keeps the cabinet-side wiring to a single cable run to the SINAMICS S200. Holding-brake leads are integrated in that same cable, so panel-side wiring is a one-connector drop rather than a separate brake terminal strip.
Compliance, export, and lifecycle status
The motor has been RoHS-compliant since 01-01-18, and REACH Article 33 candidate-list substance information is published for the part. Export control is AL:N / ECCN:N, so cross-border shipments do not require an export licence on this code.
Procurement posture for the 1FL2102-2AF10-0SC0
Because the listing is flagged as a configured, made-to-order item that cannot be returned or reused against credit, the supply channel is quoted-to-order against the BOM line rather than pulled from shelf stock. Lead time and current pricing for the 1FL2102-2AF10-0SC0 are confirmed at RFQ through independent industrial distribution — submit the quantity and any SINAMICS S200 drive pairing detail and we will return a quoted lead time and volume break.