S-1FL2 low-inertia servo sized for SINAMICS S200
The 1FL2102-2AF11-0HC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, built and tested to pair directly with a SINAMICS S200 drive — specifying the drive on the same BOM line keeps the encoder/connector pinout and the parameter set on a supported combination. Electrical envelope is 400 V 3AC supply, 50 W rated power at 3000 rpm, with both stall torque and rated torque at 0.16 Nm on a 20 mm shaft-height frame — meaning this is the smallest-rated frame in the 1FL2 family, used for light point-to-point axes, small-format indexing tables, and auxiliary feed axes rather than the main spindle of a converting line.
Holding brake, oil seal, and the panel-side hand-off
The motor ships with an integrated holding brake, an IP65-rated housing with oil seal, and a 17-bit hybrid connector (AS-interface style comms/power in one shell) — the brake is the feature that lets the axis hold position with the drive disabled, which matters on vertical or inclined axes where a power-loss coast would be a safety event, and the IP65 oil-seal build lets it sit close to the process in light-washdown cells where a totally sealed servo is overkill but dust and oil mist are routine. Shaft output is plain (no keyway) at tolerance N — a jaw-type or zero-backlash coupling is the standard mating method on this frame; a keyed coupling is not part of the as-shipped mechanical interface.
Compliance and orderability
Compliance: RoHS-compliant since 01-01-18, with REACH Art. 33 duty-to-inform obligations on the candidate-list substances carried on Siemens's published Reach Information page; the part is not flagged for export-control licensing (AL:N / ECCN:N). Commercial class is C — built-to-order per the configuration on the order, non-returnable, supplied as a single piece — so the order code at RFQ time must match the holding brake, encoder, connector, and seal configuration the panel design calls for; the same order code with a different suffix lands a different motor.
Sourcing posture
For a Siemens-active low-inertia servo, independent distribution sources this code against the BOM and quotes lead time and price at RFQ — no live stock or ship-date claim is published on this page; the order code, group code R220, and product group X0DJ define the line on the PO so the warehouse ships the exact configured unit, not a generic 1FL2 substitute.