50 W and 0.16 Nm at 3000 rpm — sized for the small-load bench
The 1FL2102-2AF11-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the SIMOTICS S family, listed under product family 1FL2 servomotors for SINAMICS S200 and rated at Pn = 50 W with a standstill torque M0 = 0.16 Nm and rated torque Mn = 0.16 Nm at Nn = 3000 rpm on a 400 V 3AC supply. In motion-sizing terms that 0.16 Nm continuous at 3000 rpm places this firmly in the low-inertia bench-and-conveyor niche — the matched drive is the SINAMICS S200, not a general VFD, so the BOM line that buys the motor should already carry the S200 amplifier and the AS21bit hybrid cable assembly.
Shaft height 20 mm, holding brake, IP65 with oil seal
The motor carries a 20 mm shaft height — the smallest frame in the 1FL2 line — with a plain shaft (tolerance N), an integrated holding brake, and a hybrid AS21bit connector on the cabling side. Protection class is IP65 with oil seal, which is the deployment note that matters: the seal plus shaft seal mean the motor is rated for environments where cutting fluid or coolant mist reaches the housing — laboratory benches, small-format handling, and packaging machinery — but the rating does not extend to full washdown.
Lifecycle and product class — made-to-order, current production
Lifecycle is listed as current with current, so the 1FL2102-2AF11-0SC0 remains in active Siemens production; there is no official successor or cross-reference on the same record. Product class C applies — the unit is manufactured / produced to order and cannot be reused, re-utilised, or returned against credit — so the buyer-side implication is that quantity, options, and connector orientation should be frozen at RFQ rather than treated as cancellable stock.
Packaging and orderable identity
Orderable as 1 Piece in a single-pack quantity, shipping carton 315.00 x 182.00 x 172.00 mm, and classified under Group Code R220 / Product Group X0DJ — the internal codes a Siemens planner would quote against but which carry no functional meaning for the buyer.