What the spec sheet tells the panel builder
The 1FL2102-2AF11-1MC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family sized for the SINAMICS S200 drive line, drawing Pn = 50 W from a 400 V 3AC supply at Nn = 3000 rpm with both M0 and Mn rated 0.16 Nm — a small-frame servo suited to light conveyor, indexing, and tabletop-machine axes where the S200 is already specified. The 20 mm shaft height, holding brake, keyed shaft with tolerance N, and oil-sealed IP65 housing are the configuration choices already locked into this code; any deviation (no brake, smooth shaft, different connector) moves to a sibling variant in the same family, not a cross on this order code.
Production status and orderability
Lifecycle stage is marked current and the part is active in the Siemens ordering system, so a BOM line citing 1FL2102-2AF11-1MC0 stays on the live manufacturer channel rather than the last-time-buy path. Product class C applies, meaning the unit is produced to order, cannot be returned for credit, and is not a stocked exchange item — the procurement posture is quoted to order against the RFQ with availability confirmed at quote time, not pulled from a returns-friendly shelf.
Compliance and documentary trail the customer will ask for
Export control is AL:N / ECCN:N, so the part ships without an export-licence gate on the standard industrial destination list — paperwork that sometimes delays European-built small servos is not a factor here.
Internal codes a sourcing desk files against
Group Code R220 and Product Group X0DJ are the internal classification keys tied to the 1FL2 servo family; carrying them on the PO line lets the Siemens ordering system resolve the variant cleanly when the order code alone is mistyped in transcription.