Motor identity and drive pairing
The 1FL2102-2AG00-0MC0 is a SIMOTICS S-1FL2 low-voltage servo from the 1FL2 family — a 200 V 3AC class motor designed to pair with the SINAMICS S200 drive platform. Continuous rating is Pn=50 W at Nn=3000 rpm with M0=Mn=0.16 Nm — the stall and continuous torques match, which signals a low-inertia rotor intended for high-dynamic positioning rather than constant-torque hold. Mechanical envelope is shaft height 20 mm with a plain shaft (tolerance N) and a hybrid AM21bit feedback connector; no holding brake is fitted. The encoder is the single-cable AM21bit resolver variant — the hybrid connector carries power and feedback on one cordset. Sealing is IP54 without an oil seal — adequate for clean cabinet interiors, not for washdown or wet cutting-fluid environments where the next step up the family would be required.
Kit check and what the carton contains
Order quantity is 1 piece; shipping carton is 315 × 182 × 172 mm and the motor itself is the only line item on the order code — no power or feedback cable ships in the carton. The hybrid AM21bit connector on the motor mates to a separately specified SINAMICS S200-compatible cable set. Product class is C — manufactured to order, not reusable or returnable for credit. Plan the BOM line once; the part is not a shelf item that can be returned against a stock return.
Ordering and compliance references
Internal Siemens references are Group Code R220 and Product Group X0DJ — both travel on the packing list and invoice for cross-checking against the PO. Substance compliance: RoHS conformity since 01-01-2018, with REACH Art. 33 candidate-list disclosure carried as the standard Reach Information note. Export control is AL:N / ECCN:N, so the part ships without an export-licence block in most jurisdictions.