Where the 1FL2102-2AG00-1SC0 fits on the S200 line
Siemens lists 1FL2102-2AG00-1SC0 as a SIMOTICS S-1FL2 servo motor with 200 V 3AC supply, Pn=50 W and Nn=3000 rpm — the SH 20 low-inertia end of the 1FL2 family that pairs with the SINAMICS S200 drive. At 50 W continuous it sits below the typical 200 W–750 W feeder axes; it covers small-parts handling, indexing tables and auxiliary axes where a compact, repeatable positioning stage is the load, not the main spindle. M0=0.16 Nm equals Mn=0.16 Nm with no holding brake and an IP54 body — no oil seal on the shaft exit, so the motor expects a clean cabinet or light splash rather than a wet process environment.
Electrical envelope and connector detail buyers ask about
The motor is wired through a hybrid connector with a 21-bit encoder, which means the power and the absolute signal share one overmoulded plug rather than separate power and signal cords — shorter cabinet loop, fewer glands, but a non-standard mating half that must come from the same S200 cable set. Tolerance N on the shaft key and 200 V 3AC supply confirm a mainstream Asian / European low-voltage bus, not a 400 V class machine — the SINAMICS S200 PN at this rating is the natural partner drive and the encoder resolution is fixed at 21-bit single-turn, so the commutation profile is set at the drive, not by a parameter file.
Lifecycle status and the production-class constraint
Lifecycle stage is current per the manufacturer record and the part is Active — production is ongoing, but Siemens classifies it as product class C: products manufactured / produced to order, which cannot be reused or re-utilized or returned against credit. For a sourcing desk that means a cancelled line cannot be reabsorbed into stock; quote against the BOM with the correct quantity and accept a built-to-order lead, do not place a speculative reorder. Compliance paperwork in scope: RoHS conformity since 01-01-18 and REACH Art. 33 duty-to-inform per the current SVHC candidate list. The unit ships with a single-piece carton at 315 x 182 x 172 mm — small enough for direct panel-builder drop-ship without a freight quote.