Servomotor rating and mechanical envelope
The 1FL2102-2AG01-1MC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family, purpose-paired with the SINAMICS S200 drive platform on the 200 V 3AC supply rail. Its continuous output is 50 W at a rated speed of 3000 rpm, with stall torque and continuous torque both at 0.16 Nm — a flat torque profile over the operating band typical of a low-inertia rotor design. The shaft height is 20 mm with a keyway and tolerance N, no holding brake fitted, and the feedback is a 21-bit single-turn encoder terminated through the hybrid AM21 connector. Protection class IP65 with oil seal means the body resists low-pressure water jets and oil splash on the shaft exit — appropriate for a machine interior close to a gearbox or hydraulic pack, less appropriate for full washdown cabinets.
Group code, product group, and order metadata
Internal ordering slots are Group Code R220 under Product Group X0DJ, with each unit shipped as a single piece in packaging measuring 315.00 x 182.00 x 172.00 mm. Product class is C — manufactured to order, non-returnable and non-creditable against the order once placed, which is standard for built-to-order servo configurations. Export control flags AL:N / ECCN:N indicate no special export licence is required for the listed destinations, so cross-border project shipments do not need an additional classification step. Compliance with the RoHS substance restrictions has been declared since 01-01-18, and REACH Article 33 candidate-list information is published by Siemens.
Production status and BOM-fit reality
Lifecycle stage is recorded as current, so the 1FL2102-2AG01-1MC0 is still being built against order — no last-time-buy window is open, and no successor code has been published. For a project freeze this means the motor can stay on the BOM without an immediate cross-reference, but the build-to-order class means unit-level availability is confirmed at RFQ rather than pulled from shelf stock.