Where this 50 W S-1FL2 sits in a SINAMICS S200 axis
The 1FL2102-2AG11-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor rated 50 W (Pn) at 3000 rpm (Nn), with matched stall and rated torque of 0.16 Nm (M0 = Mn), sized for the small-frame end of the SINAMICS S200 servo drive family where short, repeatable moves matter more than continuous shaft work. Shaft height is 20 mm, protection class IP65 with oil seal, plain shaft with tolerance N, and a holding brake fitted — the combination that lets the motor hold a vertical or tensioned load at standstill without back-driving through the SINAMICS S200.
Feedback and wiring at the cable end
Feedback is single-turn 21-bit absolute (AM21), routed through the hybrid connector on the motor face — the one cable carries both power and encoder back to the SINAMICS S200, which removes the separate encoder cord that older servo installs needed and cuts cabinet penetrations on tight axis layouts. IP65 with oil seal is the rating that puts the 1FL2102-2AG11-0MC0 inside cabinets near coolant splash or in food-adjacent panels where a standard IP64 motor would not survive — the seal sits at the shaft exit, not just the housing joint.
Lifecycle, ordering code and compliance paper trail
Lifecycle is current — the part is on the official active list, with no successor or LTB date published. It carries product class C, meaning each unit is built to order and not returnable for credit, so the BOM line should be frozen with that constraint before the RFQ goes out. Compliance paper trail: RoHS conformity since 01-01-2018, REACH Art. 33 candidate-list information provided, export classification AL:N / ECCN:N. Packaging is single piece in a 315 x 182 x 172 mm carton, Group Code R220, Product Group X0DJ — the codes the planner needs on the purchase order line.