What this motor is and where it sits
The 1FL2102-2AG11-0SC0 is a SIMOTICS S-1FL2 low-voltage servomotor out of the 1FL2 family, sized for the SINAMICS S200 drive line — at 200 V 3AC supply, Pn 50 W, Nn 3000 rpm, with a 0.16 Nm stall torque (M0) and 0.16 Nm rated torque (Mn) that match the small-frame S200 servo drives on small-format automation cells, not the heavy industrial axes. Shaft height 20 mm puts it in the compact end of the 1FL2 range, where the holding brake and the AS21bit hybrid connector combination decides fit long before the torque rating does. It carries an IP65 protection class with an oil seal on the shaft, so the housing tolerates dust and low-pressure water jets typical of a machine enclosure or a washdown-adjacent cell — but it is not a fully sealed food-grade motor, and the oil seal on a plain shaft (tolerance N) means shaft loading must respect the seal friction. Plain shaft (no key) pushes the coupling choice to the integrator's clamp or collet design rather than a keyed coupling.
Why the headline numbers matter for the BOM line
The holding brake option on this variant (suffix -0SC0 carries the brake) holds the axis at standstill when the drive is de-energized — relevant for vertical axes or any load that could drift on power-off. The AS21bit hybrid connector bundles power and the absolute encoder single-turn 21-bit feedback into one plug, which removes a separate feedback cable run and the related shielding/grounding discipline that two-cable variants need.
Compliance, lifecycle, and ordering posture
Lifecycle is marked current and the product status is active — produced to order under product class C, which means it is built against the order, not held as stock at the manufacturer, so quantities and lead times are confirmed at RFQ. Group code R220 and product group X0DJ are the catalog trail on the manufacturer's side; for the buyer's PO line, the orderable unit is one piece and the pack ships at 315 x 182 x 172 mm. Export control is AL:N / ECCN:N, which removes the dual-use export paperwork from the buyer's side for most destinations.
Sourcing this exact order code
Send the RFQ with the drive line (SINAMICS S200), the cable length need, and the holding brake / connector choice locked, and a firm lead time comes back against the order quantity.