Built-to-order on a current lifecycle, not a shelf SKU
The 1FL2102-4AF11-0SC0 sits as Active on the manufacturer's lifecycle register, so the line is still being cut today and quoting on the BOM is the procurement posture rather than scrambling the surplus market. It carries product class C — built-to-order per configuration, which cannot be returned against credit — so the spares playbook is to lock the configuration against the installed SINAMICS S200 drive before the RFQ goes out, not after a stock receipt.
100 W frame on the SINAMICS S200: voltage, speed, torque
400 V 3AC supply with Pn 100 W at Nn 3000 rpm puts this squarely in the low-inertia, low-power point-of-motion slot — the 1FL2 family for the SINAMICS S200 drives uses hybrid connector AS21 bit encoder and is sized for light assembly axes, feeders, and small-format positioning tables rather than main spindle duties. Stall and rated torque both sit at 0.32 Nm (M0 0.32 Nm, Mn 0.32 Nm) on a shaft height 20 mm plain shaft, tolerance N — the M0 = Mn figure signals a constant-torque envelope across the speed range with no field-weakening region relevant at this frame, so sizing against the load's continuous RMS current rather than peak current is what dictates the BOM line. IP65 with oil seal on a holding-braked motor means it is built for the shop-floor cabinet exterior or machine-frame mount where coolant splash and oil mist reach the seal face; the holding brake is part of the configuration rather than a field retrofit, so the brake option must be specified at order, not added later.
Compliance pack: RoHS, REACH, and what spares holding needs
RoHS substance compliance has been on the record since 01-01-18 and REACH Art. 33 candidate-list information is published — that is the minimum cabinet for a current-production spares holding on a European site, and it answers the document-control check before the motor lands in the storeroom. Export control markings read AL:N / ECCN:N, so no dual-use export paperwork gate applies for typical industrial shipment — useful to note when staging the critical spare for a site outside the standard EU/NA lanes.
Identifying the part on the ERP line
Group Code R220 and Product Group X0DJ are the identifiers the ERP and Siemens configurator use to pin the configuration — match those against the installed base's MRP master before quoting, since product class C means a misconfigured order is non-returnable, not an inventory correction. Shipped 1 piece per package quantity in a 315.00 x 182.00 x 172.00 mm pack, so the storeroom slot and the inbound goods inspection bench need to accept that footprint without flexing the unboxing procedure.