100 W at 3000 rpm — what that torque means on the line
The 1FL2102-4AF11-1HC0 is a SIMOTICS S-1FL2 servomotor: 400 V 3AC supply, rated power 100 W (Pn), rated speed 3000 rpm (Nn), and a rated torque of 0.32 Nm that equals its stall torque (M0 = Mn = 0.32 Nm), which says the motor is rated for continuous stall-class work at full torque without derating. It belongs to the 1FL2 servomotor family built for the SINAMICS S200 drive system, so the matching drive electronics, the encoder protocol, and the commissioning toolchain are the same ones you would use for any other 1FL2 sibling on the rack.
Mechanical package and on-machine integration
It ships with a keyed shaft (tolerance N), an integrated holding brake, and IP65 with an oil-seal flange at the shaft pass-through — the seal is what lets the motor ride near lube mist, light coolant splash, or gear-box oil without weeping into the encoder. Electrical landing is a hybrid connector carrying the power and the 17-bit single-turn absolute encoder (AS17bit) in one plug — the same connector family used across the 1FL2 line, so spare cabling already on the shelf for a sibling transfers directly. Packaging runs at 315 x 182 x 172 mm per piece, the kind of small-format box a receiving dock can stage alongside the drive module rather than on a pallet.
Sales posture and shipping paperwork
Product class is recorded as made-to-order with no return-for-credit allowance — worth flagging on the internal PO so spares are not ordered against a planned-return workflow.
Sourcing posture for the procurement line
Group code R220 and product group X0DJ are the admin traceability fields on the Siemens order record — they matter for internal PO line-coding, not for the electrical fit decision.