What this order code covers
1FL2102-4AG00-1HC0 is a SIMOTICS S-1FL2 low-inertia servomotor sized for the 200 V three-phase SINAMICS S200 drive line, rated at 100 W continuous with a 0.32 Nm standstill and rated torque and a 3000 rpm rated speed on a shaft height of 20 mm. It ships without a holding brake and uses a hybrid connector rather than a pure power or pure signal connector, with a keyed shaft with tolerance N and an IP54 enclosure without an oil seal.
Reading the ratings for panel fit
The 100 W continuous rating against a 0.32 Nm torque ceiling is the load budget that drives motor sizing, and 3000 rpm is the rated speed — beyond that the motor is operating in field-weakening or constant-power territory and the drive must hand off the control loop. IP54 without an oil seal means the motor tolerates light dust and splash environments but is not sealed for oil mist or coolant exposure — for a wet cell or food-grade line the matching IP65 variant in the same shaft height is the right pick instead.
Production class and procurement reality
Compliance on file is RoHS-conformant since 01-01-18 and Reach Art. 33 information is provided by the manufacturer; no UL or IEC standard mark is captured in this evidence set.