Pairing it with a SINAMICS S200
The 1FL2102-4AG00-1MC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family sized for the SINAMICS S200 drive — 200 V three-phase supply, 100 W rated power, 3000 rpm nominal, with 0.32 Nm at both M0 (stall) and Mn (rated), so the continuous torque envelope equals the stall figure for this frame. Mechanical integration is fixed by the build: shaft height 20 mm, plain shaft with key and N tolerance, IP54 sealing without an oil seal, and a 21-bit hybrid AM2 connector — the mating cable set and drive-side parameters live in the SINAMICS S200 configuration, not this motor's ordering code.
What the ratings commit to
At 100 W and 3000 rpm the motor sits in the low-inertia / small-format end of the S200 system, suitable for indexing tables, light feeders, lab automation and small-format pick-and-place axes where the 0.32 Nm stall torque is the sizing ceiling, not the headline nameplate wattage. IP54 without an oil seal means the housing is dust-protected and splash-resistant, but the bearing area is not sealed for oil mist or washdown — confirm the surrounding enclosure and shaft sealing before specifying on a wet-process line. There is no holding brake on this build; vertical-axis applications where the load must be held at rest require a brake option in the family rather than a field retrofit.
Sourcing posture for a configured-to-order servo
Lifecycle is recorded as active and current, and the part is built to order under product class C — it is produced per the order, cannot be returned for credit, and is supplied one piece per package (315 × 182 × 172 mm), so spares holding and stock posture need to be planned against build lead time, not shelf availability.