Built to slot into a SINAMICS S200 axis
The 1FL2102-4AG01-0MC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family designed to pair with the SINAMICS S200 drive, with a 200 V 3AC supply rail and a rated output of 100 W at 3000 rpm. Continuous and stall torque are both listed at 0.32 Nm, on a 20 mm shaft height with a plain shaft (tolerance N), no holding brake, and a 21-bit hybrid AM2 encoder for absolute position feedback on the connected drive.
Ratings that decide fit on a S200 axis
100 W at 3000 rpm with 0.32 Nm continuous puts this motor squarely in the low-inertia, fractional-horsepower class — the usual fit is light indexing tables, small feeders, labelling heads and label/print applicators, not conveyor drives or pump skids. IP65 with oil seal at the shaft exit means the housing tolerates coolant mist and light washdown on a machine-tool or food-adjacent line; the seal, not the housing paint, is the wet-side barrier, so the cable gland on the hybrid connector must be torqued to its seated position for that rating to hold.
Compliance and what ships in the box
The unit is RoHS-compliant since 01-01-18, carries REACH Art. 33 candidate-list disclosure, and is not dual-use (Export Control AL:N / ECCN:N), so export paperwork is routine and no separate licence gate applies. Siemens lists this under product class C — built to order, not returnable for credit — so a returned spare cannot be restocked; the BOM quantity should match the actual axis count plus any spares the MRO plan keeps on the shelf. The motor ships as a single piece in a 315 x 182 x 172 mm package; ordering unit is one, packaging quantity is one.
Sourcing posture for an active build-to-order part
Quoting against the BOM is the working channel for this build-to-order class; lead time and current pricing for the 1FL2102-4AG01-0MC0 are confirmed at the RFQ stage rather than carried as a fixed shelf figure.