100 W at 200 V 3AC — what this motor delivers
The 1FL2102-4AG01-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family built to pair with the SINAMICS S200 drive, with a 200 V 3AC supply rail, a rated power of 100 W and a rated / stall torque of 0.32 Nm at a nominal speed of 3000 rpm, which makes it the small-frame end of the S200 motion kit — useful for light indexing, small part feeders and auxiliary axes rather than main spindle duty. It carries a 20 mm shaft height and is supplied with a keyed shaft (tolerance N), a 21-bit hybrid AS connector, and no holding brake — so any holding torque the application needs must come from the load or a downstream brake on the gearbox, not the motor itself.
IP65 with oil seal — sealing level, not just an enclosure tag
Listed protection class is IP65 with oil seal at the shaft, which keeps coolant and oil mist out of the bearing housing on a machine tool or food-pack line; the hybrid connector provides the only separable interface, so the sealing boundary is the connector face and the shaft seal, not the housing paint.
Compliance and export control
RoHS compliance has been in force for this code since 01-01-18 and the part carries REACH Art. 33 information-duty status, so EU declarations ship with the unit; export control is AL:N / ECCN:N, which means no special licence gating for the usual destinations — paperwork is the same as a standard commercial servo.