100 W, 0.32 Nm, 3000 rpm in a 20 mm shaft-height frame
The Siemens 1FL2102-4AG11-0HC0 is a SIMOTICS S-1FL2 low-voltage servo in the 1FL2 family sized for the SINAMICS S200 drive platform, built as a 3AC 200 V unit with a rated power of 100 W, a rated speed of 3000 rpm, and matched stall and continuous torque of 0.32 Nm — small enough for light-feed, indexing, and pick-and-place axes where a higher-inertia motor would overshoot the move profile. The 20 mm shaft height and IP65 protection with oil seal make it a fit for cabinet-side mounting close to the load, where oil-mist contamination from gearboxes or adjacent machines would attack an unsealed servo; the integrated holding brake lets the axis hold position on de-energise without an external spring-set brake. Feedback is a 17-bit single-turn absolute encoder through the AS-series hybrid connector — one cable carries power and encoder back to the SINAMICS S200, so cabinet-side wiring is the drive's power lead and a single motor cable, not a separate resolver run.
Made-to-order product class — plan ahead for the BOM line
Siemens lists this MPN under product class C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit — so a returned motor is not a credit, and the BOM should not assume stock-and-return buffer stock. RoHS compliance has been in force since 01-01-18 and REACH Art. 33 information is provided per the current candidate list — the declaration pack is standard for a current-production SIMOTICS servo, not a special documentation request.
Sourcing posture for 1FL2102-4AG11-0HC0
Built-to-order SIMOTICS servos of this class are typically specified into the BOM and pulled against the project schedule rather than pulled from forward stock — group code R220 and product group X0DJ identify the line internally, which is what purchasing and the Siemens quoting desk will reference when the RFQ is opened.