0.2 kW continuous, 0.64 Nm — what the headline numbers commit you to
The 1FL2103-2AF00-0MC0: The part is a SIMOTICS S-1FL2 low-voltage servo motor, 0.2 kW rated power, 400 V 3AC supply, with a rated and standstill torque of 0.64 Nm at a nominal speed of 3000 rpm — a shaft height 30 mm frame sized for light-conveying, indexing and small-format packaging axes rather than main drive duties. It ships without a holding brake, with a plain shaft (tolerance N), an AM21bit hybrid connector for feedback and power, and IP54 protection class without an oil seal — meaning the sealing envelope assumes a clean cabinet interior, not a wet or oily machine surface.
Paired to the SINAMICS S200 — a matched set, not a standalone part
The motor belongs to the 1FL2 family built exclusively for the SINAMICS S200 drive platform — Siemens lists the S200 as the matching drive, which locks the cable, encoder and parameter set to that ecosystem. The 400 V 3AC supply and 21-bit hybrid connector mean the drive wiring and feedback harness are S200-specific; a designer porting the axis to a different drive line should expect a cable change, not just a parameter swap.
Active production, order-class item, no second source on record
Siemens lists the lifecycle stage as current and the part is classified as a product manufactured to order — which means there is no return-for-credit path; orders are built against the placed quantity and shipped once produced. RoHS compliance has been in force since 01-01-18 and REACH Article 33 disclosure applies via the standard Reach Information provision — the regulatory envelope is current and documented. No official successor or cross-referenced alternate is recorded for this order code, and the export-control markings (AL: N / ECCN: N) place it on the unrestricted-destination list for most jurisdictions.