400 V 3AC, 0.2 kW, 0.64 Nm — what this 1FL2 actually is
The 1FL2103-2AF00-0SC0 is a SIMOTICS S-1FL2 low-voltage servomotor built to pair with the SINAMICS S200 drive family, sized at shaft height 30 mm for compact machine axes where panel space is the binding constraint. On the rating plate this code means 400 V 3AC supply, 0.2 kW rated power at 3000 rpm, with 0.64 Nm continuous torque available from zero speed through rated speed — Mn equals M0 here, which tells a commission engineer the motor is wound for continuous stall duty, not just a peak burst at speed. The shaft is plain (no key) at tolerance N, no holding brake is fitted, and feedback is the AS21bit absolute single-turn encoder on a hybrid connector — a 21-bit device that resolves roughly 2 million counts per turn, more than enough for the 0.2 kW positioning axes this frame is targeted at.
Frame size, sealing, and the SINAMICS S200 pairing
Protection class is IP54 without an oil seal, so the motor body tolerates splash and dust ingress typical of a cabinet-mounted packaging or pick-and-place axis, but it is not a washdown-rated servo — if the application is food-grade or outdoor, the datasheet derating curves and a higher-IP variant need to be on the BOM line, not this one. Because the listing explicitly names the matching drive family as SINAMICS S200, sizing the drive, controller, and motor as a set is the correct procurement path — the encoder bus, power lead, and parameters are tuned inside that drive firmware, so substituting a third-party drive on the same frame normally costs a commissioning weekend. Packaging ships at 315.00 x 182.00 x 172.00 mm per unit, single-piece quantity, which is consistent with a bench-pack servomotor rather than a multi-up bulk pack — useful for an MRO planner pulling a single spare rather than a build quantity.
Lifecycle, RoHS/REACH posture, and what 'made to order' means here
Lifecycle is active on the official record, so this is current production rather than a withdrawn frame; the Group Code R220 and Product Group X0DJ identifiers are the internal Siemens classification keys for this 1FL2 line and should be carried through on any RFQ so the factory quotes the exact build, not a visual match. The product is declared RoHS-compliant since 01-01-18 and carries the standard REACH Article 33 duty-to-inform statement against the current candidate list — meaning the EU compliance dossier is intact, but any custom-built 1FL2 with options outside the catalog may need a separate substance declaration pulled from the manufacturer. Product class is the Siemens 'made to order / non-returnable' designation: 1FL2103-2AF00-0SC0 is built to a specific option list when ordered, which is why surplus and broker channels carry very little of it — the safe procurement path for an integrator or MRO buyer is to quote against the BOM configuration rather than chase spot stock of an unspecified build.