SIMOTICS 1FL2, sized for a 0.2 kW axis
The Siemens 1FL2103-2AF01-0HC0 is a low-inertia SIMOTICS S-1FL2 servomotor from the 1FL2 family, designed to pair with a SINAMICS S200 drive on 400 V 3-phase supply, rated 0.2 kW continuous at 3000 rpm with a 0.64 Nm continuous torque figure. The 30 mm shaft height and plain shaft with tolerance N mark it as the compact-end member of the 1FL2 line — a fit where short-axis dynamics matter more than stall torque. Holding brake is omitted on this variant and protection is IP65 with oil seal, so the motor body and shaft seal survive coolant splash and light washdown typical of small part-handling and packaging cells, but the unit is not rated for full immersion. The hybrid connector and 17-bit absolute encoder (AS interface) cut the on-site wiring down to a single cable run, which is the practical reason integrators pick the 1FL2 family over older 1FK/1FT motors when commissioning time is the constraint.
0.2 kW at 3000 rpm: what the rating drives
0.2 kW at 3000 rpm and 0.64 Nm continuous defines the working envelope — pick this motor for low-inertia loads (small conveyors, indexing tables, light pick-and-place) where fast accel/decel matters more than holding torque; if the application stalls at standstill or needs significant torque margin, the next 1FL2 frame up is the correct cross-check.
Compliance and order-code context
Siemens lists this part under Group Code R220, Product Group X0DJ, with Product Class C — meaning it is built to order, non-returnable, and non-reusable as a credit against a future line — so the BOM commit is firm once the order is placed.
Packaging and panel handling
The motor ships as a single piece in a 315 x 182 x 172 mm pack — compact enough for one-piece handling on a build bench or a field swap without lifting kit, and the single-piece quantity unit matches the per-axis BOM convention.