Servomotor definition for this 1FL2 frame
The 1FL2103-2AF01-1HC0 is a SIMOTICS 1FL2 low-inertia servomotor — a brushless three-phase AC servo with a single-turn absolute encoder, sized for the lower end of the SINAMICS S200 motion family.
Ratings and what they mean for the axis
Supply voltage is 400 V 3AC with a rated output of 0.2 kW at a nominal speed of 3000 rpm — both standstill torque (M0) and rated torque (Mn) sit at 0.64 Nm, which is the steady-state torque ceiling the SINAMICS S200 will command at the rated point. The 30 mm shaft height places this frame in the small-flange segment of the 1FL2 family, intended for compact point-to-point axes and small-parts handling where the 0.64 Nm envelope is the binding design figure, not the headline 0.2 kW. IP65 with oil seal means the housing tolerates light splash and oil mist around a machine tool or gearbox — the seal at the shaft exit is what carries the rating, not just the connector face.
Encoder, shaft, brake, and matched drive
The motor carries an AS17bit absolute encoder terminated through a hybrid connector — one cable carries both power and the digital encoder feedback to the SINAMICS S200 drive, which is the only matched drive Siemens designates for this frame. Mechanical interface is a keyed shaft with tolerance N and no holding brake — selecting this option means the application must hold position with the drive's regenerative braking or an external holding element, because the motor itself has no fail-safe torque at standstill.
Compliance and order-class facts
The part has been RoHS-compliant since 01-01-18 and falls under REACH Art. 33 duty-to-inform obligations, with the candidate-list statement provided via the linked Reach Information notice. Product class is C — built to order, non-returnable — which is consistent with the configured encoder, shaft, brake and seal options stamped into the order code; Group Code R220, Product Group X0DJ. Export control is AL:N / ECCN:N, so the part leaves the EU without a dual-use export licence and clears standard cross-border paperwork. Inbound packaging is 315 x 182 x 172 mm per piece — single-unit pack, suitable for bench receive and small-crate shipping.
Sourcing posture
This 1FL2103-2AF01-1HC0 is built to order under product class C, so quoting is anchored on the configured code rather than bulk stock; the order is placed against the BOM with lead time and price-tier confirmed at RFQ.