What this motor is and where it slots in
The 1FL2103-2AF01-1MC0: SIMOTICS S-1FL2 low-inertia servo motor in the 1FL2 family, sized for use with the SINAMICS S200 drive line — a 0.2 kW shaft height 30 mm frame in the SINAMICS S200 motion-control stack (cites:, cites:). For a buyer, the headline spec set is a single sentence: 400 V 3AC supply, 0.2 kW rated power, 3000 rpm rated speed, 0.64 Nm stall and rated torque, frame height 30 mm — i.e. a small-format servomotor for light loads on the S200 system (cites:).
Connector, sealing, and shaft options
Hybrid connector AM21bit and a keyed shaft (tolerance N) with shaft key, no holding brake — a configuration aimed at simple, single-cable drive hookup on the S200 amplifier rather than vertical-axis load holding (cites:). IP65 protection with oil seal on the shaft pass-through: the body is sealed enough for washdown-adjacent and plant-floor duty, but the sealing path runs through the oil seal at the shaft — keep that surface clean and the seal seated for the rating to hold (cites:).
Compliance and what ships with the unit
Product class C — built to order, non-returnable, non-reusable against credit; one piece per quantity unit, packaged 315 × 182 × 172 mm (cites:, cites:, cites:).
Lifecycle read and how to source it
Lifecycle stage is current and product status is Active — the motor is still in normal production as part of the 1FL2 / SINAMICS S200 generation (cites:, cites:).