Sizing a low-inertia 0.2 kW axis on S200
The 1FL2103-2AF01-1SC0: The SIMOTICS S-1FL2 shaft-height 30 mm servomotor is rated 0.2 kW at 3000 rpm with 0.64 Nm continuous (M0 and Mn equal), running from a 400 V 3AC supply on a SINAMICS S200 drive — so the drive pairing, voltage class, and torque envelope are all locked at the order-code level, not field-configurable. The 21-bit hybrid connector and shaft-key (tolerance N) output, with no holding brake, point at light dynamic axes — labelling, small part feeders, and short-stroke pick-and-place stations — rather than vertical or gravity-loaded axes that need an integrated brake.
What the IP65 oil-seal envelope covers
IP65 with oil seal on the shaft entry means the motor body and shaft exit tolerate coolant mist and cutting-oil splash typical of a machining cell or washdown-adjacent station — the seal is at the rotating interface, so the rating follows the gland, not the housing paint.
Compliance posture for incoming inspection
RoHS substance compliance has been in force since 01-01-18 and REACH Art. 33 candidate-list information is available from the manufacturer — for a 2024-onward build these are the minimum expected; the decl pack should arrive with the shipment, not be chased from procurement. Export control classification shows AL:N / ECCN:N, so the motor ships without an export-licence gate on the dock — useful when this axis is a sub-build inside a global machine export programme.
Active production, ordered against the BOM
Lifecycle status is recorded as current/active, with product class C — built to order, non-returnable against credit — so the BOM line carries a firm commitment once released; the motor is not a shelf-swap item. Sourced through independent distribution against an RFQ: group code R220 and product group X0DJ are the internal classifications to put on the purchase-order line so the order lands in the right channel and the warranty trace stays clean.