What this servo is built to do
The 1FL2103-2AF10-1HC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family, supplied as 400 V 3AC at 0.2 kW rated power with a nominal speed of 3000 rpm, and it carries both a stall torque and a rated torque of 0.64 Nm, meaning it is sized for small-format, high-dynamic positioning rather than continuous heavy load. It is listed as matched to the SINAMICS S200 drive family, so the motor-feedback resolution, electrical interface, and commissioning profile are expected to be tuned against that converter rather than as a standalone stage.
Shaft, brake, and connector details
The motor is built on a 30 mm shaft-height frame with a keyed shaft (tolerance N) and an integrated holding brake, so the assembly holds position on the load side when the drive is de-energised — a standard arrangement for vertical-axis or gravity-loaded axes. Wiring lands on a hybrid connector and the resolver side is delivered as a 17-bit absolute encoder (AS17bit), which means absolute position survives a power cycle and the controller can home without a referencing move on every restart.
Protection class and where it can live
The motor is rated IP54 without an oil seal, which is adequate for general industrial cabinet interiors and light splash zones but does not suit wet washdown, food-grade lines, or outdoor mounting where an IP65 or higher sealed servo would be the right-sized spec.
Compliance and ordering codes on record
The motor is listed as compliant with the RoHS substance restrictions since 01-01-18, and REACH Article 33 duty-to-inform is flagged with a reference to the current candidate list, which is the documentation set a procurement audit will ask for at goods-in.