0.2 kW at 400 V on a 30 mm shaft-height frame
The Siemens 1FL2103-2AF11-0HC0 sits in the SIMOTICS S-1FL2 family of low-inertia servomotors and is specified for pairing with a SINAMICS S200 drive — the 400 V 3AC supply, 0.2 kW rated power, 3000 rpm nominal speed, and matched 0.64 Nm standstill / rated torque define the operating point the drive is sized against. The shaft-height-30 mm frame and identical standstill/rated torque (0.64 Nm / 0.64 Nm) make this a constant-torque-rated servo rather than a fan-cooled high-speed variant — the integrator's concern is the load inertia ratio at 3000 rpm, not thermal headroom. IP65 with oil seal on the shaft side means the motor is sealed for equipment areas where cutting fluid or oil mist is present, while the AS17bit hybrid connector carries power and the absolute encoder signal in one plug — the drive end is the only wiring decision the panel builder actually owns.
Lifecycle is current; order is built to order, non-returnable
Lifecycle status is current/active, so the part is on the manufacturer's active BOM and is not a last-time-buy scenario — the procurement question is delivery date against the install milestone, not a phase-out deadline. Product class C is explicit: the motor is manufactured / produced to order, cannot be reused, and is not returnable against credit — that drives the quantity discipline in the BOM and rules out speculative over-ordering to chase a price break. Compliance carries a RoHS conformity date of 01-01-18 and a REACH Art. 33 duty-to-inform flag, both standard for current Siemens servo stock and worth flagging on the declaration of conformity for the receiving panel.
Holding brake and tolerance N shape the cabinet-side install
A holding brake is fitted, so the axis holds position with the drive disabled — vertical-axis sizing must still confirm the brake torque against the static load, because the 0.64 Nm rating is the motor's working figure, not the brake's holding figure. Plain shaft, tolerance N, with oil seal: the shaft side is press-fit, not keyed in the description — coupling selection (clamp or keyed sleeve) follows the machine builder's standard, and the IP65 rating holds only when the seal sits against the oil-sleeve surface the manual defines. Packaging is one piece per carton at 315 x 182 x 172 mm — a single motor fits inbound on a standard courier cycle and does not need a dedicated crate, which keeps the panel-builder's receiving area straightforward.