What the box gives the panel builder
Siemens 1FL2103-2AF11-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family built to drive on the SINAMICS S200 — the listing calls out 400 V 3AC supply, Pn = 0.2 kW at Nn = 3000 rpm, with stall and rated torque both at M0 = Mn = 0.64 Nm, so the motor's overload headroom sits in the drive's current margin rather than in the motor itself. Shaft height 30 mm, hybrid connector AS21 bit, plain shaft to tolerance N, holding brake fitted, IP65 with oil seal — meaning the sealing spec is good for a typical factory-floor cabinet-to-machine run with oil-mist exposure, not for direct washdown.
Build-to-order posture and what it means at RFQ
The product class is stamped C — built per order, not returnable for credit — and ships one piece per carton with packaging dimensions 315 x 182 x 172 mm. In plain terms, the factory does not hold buffer stock of this code, so the lead time is a build slot, not a pick from a regional warehouse; the RFQ has to carry quantity and the S200 drive pairing up front so the factory can confirm the build window. Lifecycle stage is recorded as current, and the factory status is active — so a buyer can plan this code into a new machine without an obsolescence hedge, provided the lead time fits the project's slot.
Compliance paper trail the doc desk expects
Export Control reads AL:N / ECCN:N, which means no special export paperwork is triggered for cross-border shipment under the usual regimes.