Definition and pairing to SINAMICS S200
The 1FL2103-2AF11-1HC0: A 1FL2-series low-inertia servomotor from the SIMOTICS S-1FL2 family, designed and sold as the matched rotor for a SINAMICS S200 drive section — the motor and drive are not independent SKUs in practice, the pairing defines the BOM line.
What the winding and brake do for the axis
Rated 0.2 kW on a 400 V 3AC supply at a nominal 3000 rpm, with standstill torque M0 = 0.64 Nm and rated torque Mn = 0.64 Nm — equal M0 and Mn is the signature of a motor sized for continuous-duty positioning rather than peak-acceleration profiles, so it suits light-feed, indexing and small-format converting axes where the holding brake matters more than surge margin. Shaft height 30 mm with shaft key (tolerance N), integrated holding brake, oil-sealed IP65 housing, and a hybrid AS17bit encoder connector — the brake holds position on de-energised vertical axes and the oil seal lets the motor mount near gearboxes without immediate re-lube of the seal lip, while IP65 means the housing tolerates routed coolant splash and panel-side washdown but is not a submersion rating.
Build class, packaging and order posture
Product class C — built to order, not returnable for credit — and packaged one piece per carton at 315 × 182 × 172 mm, so each motor is a discrete production slot rather than a stocked commodity SKU; line-down situations need the RFQ in motion before the spindle is open.