Where this 0.2 kW 1FL2 fits the SINAMICS S200 line
The Siemens 1FL2103-2AF11-1MC0 is a SIMOTICS S-1FL2 low-inertia servomotor designed to pair with the SINAMICS S200 drive family, sized at 0.2 kW with a continuous rated torque of 0.64 Nm and a rated speed of 3000 rpm from a 400 V 3AC supply rail. On a packaging or small-parts handling axis, that envelope is the right frame for index tables, light feed conveyors, and lab automation where the load is dominated by inertia rather than continuous torque. The motor carries a 30 mm shaft height with a keyed shaft (tolerance N), a hybrid AM21-bit absolute encoder, and a factory-fitted holding brake — the configuration a panel builder expects when the load must hold position with the drive stage de-energised, and when absolute position must survive a power cycle without re-homing.
IP65 with oil seal — cabinet placement
Protection class IP65 with oil seal means the motor housing and shaft seal resist dust ingress and low-pressure water jets, which lets the unit sit on the machine frame near the process rather than inside a fully sealed cabinet — useful when the SINAMICS S200 drive and motor are co-located on a moving gantry or in a cell with limited enclosure space. For washdown lines or food-grade splash zones, IP65 is the minimum survival rating, not the target.
Compliance pack — RoHS, REACH, export classification
The part has been compliant with the RoHS substance restrictions since 01-01-18 and is shipped with the REACH Art. 33 information duty fulfilled, so the declaration-of-conformity pack for an EU customer audit is covered on the substance-restriction side. Export control is AL:N / ECCN:N, meaning no export licence is required for typical cross-border shipments — relevant for a parallel-import or EU-to-US re-export trade lane.
Quoting posture for the BOM line
Because the part is class C (made-to-order, single-piece unit, 315 x 182 x 172 mm packaged), the practical procurement move is to specify the exact configuration into the RFQ — 400 V 3AC, 0.2 kW, 30 mm shaft height, keyed shaft tolerance N, AM21-bit encoder, holding brake, IP65 oil seal, SINAMICS S200 matched — and have the integrator quote against the BOM line. Current pricing and confirmed lead time come back at quote time against that specification; no stock holding is claimed here.