Servo motor definition and what this order code resolves to
SIMOTICS S-1FL2: a low-inertia synchronous servomotor in the 1FL2 family, sized for 200 V three-phase supply at 0.2 kW rated power and 3000 rpm rated speed, with continuous and stall torque listed at 0.64 Nm (Pn=0.2 kW; Nn=3000 rpm; M0=0.64 Nm; Mn=0.64 Nm). The catalog record runs the order code 1FL2103-2AG00-0SC0 under Group Code R220 and Product Group X0DJ, packaged singly as a non-reusable, made-to-order item.
Mechanical and electrical fit at the machine
Built on a 30 mm shaft-height frame with a plain shaft (tolerance N), no holding brake, and a hybrid AS21 connector — the encoder rides through the same connector as the power lines, so cabling on the machine is one cable per motor rather than separate feedback leads. Feedback is 21-bit absolute on the 1FL2 — high-resolution positioning with single-turn resolution, suitable for the indexing and light-duty packaging applications a 0.2 kW low-inertia frame is normally specified into. Protection class is IP54 with no oil seal — appropriate for general industrial cabinets and clean machine interiors, not for wet washdown or food-grade zones where an IP65 or IP67 rating would be required. The drive side is locked: this motor matches the SINAMICS S200 only, so substituting any VFD or other servo controller is not supported on the same order code.
Compliance documentation on file
RoHS conformity since 01-01-18 is declared on the record, and REACH Article 33 disclosure information is supplied with the product — the supplier-quality sign-off can be closed against the listed substance-restriction dates without re-requesting documentation.
Sourcing posture for the BOM line
Packaging ships as a single piece in a 315.00 x 182.00 x 172.00 mm carton, so spare-unit storage and line-side handling can be planned against a defined parcel footprint.