0.2 kW / 3000 rpm — what the headline rating actually delivers
The 1FL2103-2AG00-1SC0 is a SIMOTICS S-1FL2 servo from the 1FL2 family sized for SINAMICS S200, drawing 200 V 3AC supply at a rated power of 0.2 kW with a rated speed of 3000 rpm. Stall torque M0 and rated torque Mn are both 0.64 Nm — equal figures mean there is no torque margin at standstill vs running point, so sizing must lean on the dynamic overload capability of the S200 drive rather than expecting a flat torque curve beyond rated speed. The 30 mm shaft height and IP54 sealing (no oil seal) make this the compact, dry-environment end of the 1FL2 range — fine for clean assembly cells and tabletop indexers, not for washdown or gearbox splash zones.
Encoder, brake, and mechanical fit
Feedback is the absolute 21-bit AS-i encoder — single-turn resolution high enough for positioning loops where a micron-stable axis repeat is required, paired through the hybrid connector to the S200 drive. Shaft comes keyed with Tolerance N and there is no holding brake, so any vertical-axis application needs a mechanical brake elsewhere on the drivetrain — this variant will freewheel on power loss.
Lifecycle, sourcing class, and compliance paperwork
Lifecycle stage is recorded as current and the brand status is Active, so the part is in normal production flow rather than on a phase-out curve. The product is classed as made-to-order with no return / re-use credit (class C), which matters on the procurement side — once built, this motor is built; spares should be sized against actual uptime risk, not against a returnable surplus buffer.