Form factor and what the rating envelope covers
Siemens 1FL2103-2AG01-1HC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family, sized at 0.2 kW continuous on a 200 V 3AC supply with a rated speed of 3000 rpm and matched standstill and rated torque of 0.64 Nm — meaning the motor delivers full torque from zero speed through rated, the envelope most small-format packaging and pick-and-place axes are tuned around. It carries a 30 mm shaft height, ships without a holding brake, and uses a keyed shaft (tolerance N) with a hybrid AS17-bit encoder connector — the absence of a brake matters for any axis that needs a fail-safe holding torque under power loss, and the keyed shaft plus tolerance class sets how it couples to the gearbox or pinion on the machine side.
Drive pairing and panel-side integration
The product description specifies SINAMICS S200 as the matched drive, so the cable set, encoder feedback, and electronic nameplate all expect an S200 controller on the other end — pairing it with a different drive line means re-engineering the hybrid connector pinout and the parameter handshake, not just dropping in the same cable. IP65 with oil seal makes the motor body and shaft sealing suitable for machine environments where coolant mist and gear-oil splash reach the housing — typical of small packaging, dosing, and conveyor modules — and the shipping pack at 315 x 182 x 172 mm is sized around the motor with its mating connector fitted, not stripped.
Lifecycle read and what it costs to keep the line moving
Lifecycle is listed as current and the product is grouped under code R220 / product group X0DJ, with ordering class C — manufactured to order, non-returnable — which on a Siemens motion line means a made-to-spec build rather than shelf stock, so any spare-part order should be sized against actual consumption rather than resold on credit. RoHS compliance has been in place since 01-01-18 and REACH Art. 33 candidate-list information is published, which clears the EU substance-restriction gate for new machinery builds; there is no separate UL or IEC certification line on the spec sheet, so any region-specific approval beyond the EU substance rules has to be confirmed against the project declaration of conformity rather than this listing.