200 V 3AC, 0.2 kW continuous — sized for the S200 compact drive tier
The Siemens 1FL2103-2AG10-0HC0 is a SIMOTICS S-1FL2 low-voltage servo in the 1FL2 family, purpose-built to pair with the SINAMICS S200 drive — supply voltage 200 V 3AC, rated power 0.2 kW, rated speed 3000 rpm, with standstill and rated torque both at 0.64 Nm, so continuous and peak torque coincide at this frame size. Because the rated and standstill torques are equal (M0 = Mn = 0.64 Nm), this motor delivers its full rated torque down to zero speed without a separate peak-torque envelope — useful for short-stroke index axes and small-format pick-and-place where holding torque at standstill is the design driver, not burst capacity.
AS-i hybrid connector and 17-bit feedback — what the motion loop sees
The motor carries a 17-bit absolute encoder and exits via a hybrid connector — a single-cable assembly that carries both power and the feedback signal back to the SINAMICS S200, so panel builders do not need a separate encoder cable run to the drive and the cabinet-side wiring drops to one cordset per axis. Protection class is IP54 without an oil seal — the motor body resists dust ingress and splashing from any direction, but it is not a washdown-rated enclosure, so it belongs inside the machine envelope rather than exposed to coolant spray or food-grade wash.
Active production, made-to-order class — what that means for the BOM
Lifecycle stage is recorded as current, and the product is classified as made-to-order — once the order is placed against the BOM it cannot be returned for credit, which is the standard posture for configured servo motors built to a specific option code.