Servo definition for this build
SIMOTICS S-1FL2: a low-inertia brushless servo in the 200 V 3AC class, sized for the SINAMICS S200 drive platform — meaning the motor and drive are sold as a matched pair, not mixed freely across other SINAMICS lineups (cited via description text). 1FL2103-2AG10-1HC0 is the specific build at 0.2 kW rated power (Pn) with a continuous torque of 0.64 Nm at standstill (M0) and the same 0.64 Nm rated (Mn) at 3000 rpm. Mechanical package is shaft-height 30 mm with a keyed shaft to tolerance N, a holding brake for vertical-axis or gravity-loaded applications, and IP54 protection without an oil seal — so the body resists dust and splashing but the shaft exit is not sealed against oil baths or pressure jetting, which matters when the motor mounts near a gearbox or way-lube zone.
Encoder and electrical interface
Feedback is an absolute single-turn 17-bit encoder wired through a hybrid connector — the hybrid cable carries both power cores and the encoder lines in one jacket, so the cabinet-side wiring is one cable run rather than separate motor and feedback lines. Rated on a 200 V 3AC supply, which is the standard light-industrial bus where 230 V single-phase or 200 V three-phase is available without stepping up to 400 V — the integrator should confirm the drive's input match because the S200 PN variant determines the bus, not the motor code.
Production status and order policy
Lifecycle stage is listed as current and the product is classed by Siemens as a built-to-order item (product class C): once produced it cannot be returned for credit or re-used as stock — so a panel builder carries this as a BOM line, not a shelf item, and quantities are quoted against the build schedule. Group code R220 and product group X0DJ are the internal Siemens classification keys for this servo line — useful when matching the part against a Siemens configurator export or a parts-list pulled from TIA Selection Tool.
Compliance paperwork for cross-border shipment
RoHS compliance has been declared since 01-01-18 and REACH Article 33 candidate-list information is published — so the EU declaration pack is current and the part clears standard industrial import due-diligence, with export-control markings listed as AL:N / ECCN:N meaning no special export licence is triggered for typical destinations.
Shipping pack and order unit
Sold one piece per package at 315 x 182 x 172 mm — a single motor in a carton sized for the hybrid connector and brake lead to ship coiled without strain, so the receiving dock expects one parcel per line item rather than multi-pack.