0.2 kW S-1FL2 paired to the SINAMICS S200 drive
The 1FL2103-2AG10-1MC0 is a Siemens SIMOTICS S-1FL2 low-inertia servomotor built to drop onto the SINAMICS S200 drive line — a 0.2 kW, 200 V 3AC unit sized for small-axis motion in panel builders' machines and bench-top stations. Continuous rated power is 0.2 kW at a nominal speed of 3000 rpm, with both standstill torque M0 and rated torque Mn listed at 0.64 Nm — a flat-torque profile that suits point-to-point positioning and light conveyor index drives more than high-inertia loads.
AM 21-bit encoder, holding brake, keyed shaft — N tolerance
Feedback is an absolute multi-turn encoder (AM, 21-bit resolution) wired through a hybrid connector, so the drive handles absolute position on power-up without a homing run. A holding brake is integrated and the shaft carries a keyway to N tolerance — the standard interface for direct coupling to a gear or pinion without an additional clamping element. Mechanical frame is shaft height 30 mm, sealing class IP54 with no oil seal — meaning the body is dust- and splash-protected but not rated for oil-mist duty, so cabinet-internal or clean general-purpose mounting is the natural home for it.
Lifecycle posture: active, built to order
Lifecycle stage is recorded as current, and the part is classed as a made-to-order product — it cannot be returned against credit or reused, which sets the procurement expectation to a quoted, project-pacing lead time rather than shelf-stock delivery. Substance compliance is documented: the motor has been RoHS-compliant since 01-01-18, with REACH Article 33 information published via the manufacturer's Reach Information notice.