0.2 kW frame for tight-axis S200 builds
The 1FL2103-2AG11-0SC0: It ships as a matched pairing for the SINAMICS S200 drive family; the 200 V 3AC supply voltage and the hybrid connector format (AS) and 21-bit encoder are keyed to that drive, so specifying this motor outside an S200 system means re-checking the drive-side parameter set, not just the electrical rating. Holding brake included, plain shaft with tolerance N, and an oil seal at the shaft exit — the brake handles vertical-axis static load hold after power removal, while the oil seal keeps the bearing cavity isolated from gearbox oil mist on the machine side.
Cabinet-side fit: connector, encoder, sealing
Protection class IP65 is achieved with the oil seal in place, which is the figure to design around for any cabinet-side or near-panel washdown application — without the seal the rating drops, so spares ordering should keep the seal as a service item, not a one-time fit. The hybrid AS connector and the 21-bit absolute encoder are not generic — the cable set is part of the motor's identity on the BOM, and a swap to a third-party cable can defeat the IP65 rating at the back end even when the motor body itself is intact.
Procurement and lifecycle posture
Lifecycle status is current per the manufacturer record, and the product class is C — built to order, non-returnable, non-reusable — so the right way to bring this in is as a quoted BOM line, not a safety-stock grab from open market. Group code R220 and product group X0DJ are the ordering keys a Siemens planner or distributor quoting system will echo back — quote with both so the configurator lands on the right variant of the 1FL2 family rather than a near-neighbour frame size. RoHS compliance since 01-01-18 and REACH Art. 33 duty-to-inform are on file; CE/UL/IEC markings aren't carried in this spec string, so the integrator needing those for an EU or North American panel build should request the declaration pack at quote time.
Sourcing the 1FL2103-2AG11-0SC0
Made-to-order Class C motors are sourced to the BOM quantity rather than pulled from generic shelf stock; pricing and lead time confirm against the RFQ, with the SINAMICS S200 drive typically ordered on the same line so the encoder / power cable pair ships as a matched set.