Low-inertia servomotor in the 1FL2 line for SINAMICS S200
The 1FL2103-2AG11-1SC0 is a SIMOTICS 1FL2 servomotor from Siemens, built as the rotor-and-stator low-end of the S200 servo stack — 0.2 kW rated power (Pn) on a 200 V 3AC bus, 3000 rpm rated speed (Nn), and 0.64 Nm on both the continuous (Mn) and standstill (M0) torque points, which means there is no torque boost envelope beyond Mn on this shaft height. Holding brake, hybrid connector, and 21-bit encoder close the servo loop position-side; the matched drive is SINAMICS S200. Mechanical envelope is the 30 mm shaft-height (SH30) frame with keyed shaft, tolerance N, oil-sealed at the front face — that oil seal is what carries the IP65 rating into the application, so the seal seating is the field-side decision rather than the housing thread.
Compliance and product identifiers
Product status is active under the listed code; RoHS substance restriction compliance is declared since 01-01-18, and REACH Article 33 candidate-list duty-to-inform applies via the standard Reach Information notice. Group Code R220 and Product Group X0DJ index the part on the Siemens order-side taxonomy; Product Class C means the unit is built per order and is not a returnable stock item — relevant for any RFQ that names cancellation or return terms.
Procurement posture for a configured-to-order motor
Quantity unit is 1 piece, packaging quantity 1, in a 315 x 182 x 172 mm shipper — single-unit ordering is the norm rather than a bulk pack, so the RFQ line is built one motor at a time and lead time is the binding variable rather than reel or tray availability.