What you're actually bolting to the machine
The 1FL2103-4AF01-0HC0 is a SIMOTICS 1FL2 low-inertia servomotor from the 1FL2 family built to run on a SINAMICS S200 drive — the motor and drive are a matched pair, not a free-form combination. Headline ratings on the nameplate: 400 V 3AC supply, Pn 0.4 kW, rated speed Nn 3000 rpm, with stall torque M0 and rated torque Mn both at 1.27 Nm — so the continuous and short-term torque envelope are identical here, which simplifies sizing but means there's no overload headroom above the rated figure on the continuous duty cycle. Mechanical package is shaft height 30 mm with a plain shaft (tolerance N), no holding brake, and IP65 protection with oil seal. IP65 with oil seal is the spec to look at for any application where cutting fluid or coolant mist reaches the shaft entry — the seal is what keeps the oil out of the bearing housing.
Connector, brake, and the things that trip up a BOM
Wiring side is a hybrid connector (power + feedback in one shell) — match the cable set against the SINAMICS S200 drive's motor port before committing the line item, because the 1FL2 family uses a different connector family than the legacy 1FK/1FT lines. Feedback is the 17-bit AS (absolute single-turn) encoder — single-turn absolute means position is retained while the drive stays powered, but the machine loses true absolute position on a power cycle unless the drive-side homing routine handles it. No holding brake is fitted, so a vertical-axis application needs a separate brake or a counterbalance strategy. Mounting is the standard 30 mm shaft-height flange pattern for the 1FL2 frame. The packaging carton is 315 x 182 x 172 mm — useful for the receiving bench if the motor is shipping as a service spare rather than going straight to a panel build.
Active production — but it ships order-class
The product class is C: products manufactured / produced to order, which cannot be reused or re-utilized or returned against credit — so this is not a stocked SKU that gets returned if the BOM line drops. Plan the quantity and lead time against the project, not against shelf inventory. Compliance posture from the record: RoHS conformity since 01-01-18, REACH Article 33 duty-to-inform disclosure provided, and export classification AL:N / ECCN:N (no licence required for the standard destinations). Group Code R220 / Product Group X0DJ are the internal identifiers for order entry.