What the motor delivers on the SINAMICS S200 bus
The 1FL2103-4AG10-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in shaft height 30 mm, specified for a 200V 3AC supply with a rated power of 0.4 kW and a rated speed of 3000 rpm; standstill torque M0 and rated torque Mn both sit at 1.27 Nm, which keeps the torque profile flat from base speed up through the operating point. The motor carries a 21-bit hybrid encoder, a keyed shaft with tolerance N, and an integral holding brake — the combination a position axis typically demands when it has to hold position with the drive enabled but the controller in torque-off. Protection class is IP54 without an oil seal, so it suits indoor cabinet-perimeter mounting on machine modules (packaging, light handling, small-format feeders) where splash and dust are present but the shaft end is not exposed to coolant or cutting fluid.
Sizing and pairing with the SINAMICS S200
The 1FL2 series is the matched servomotor family for the SINAMICS S200 drive platform, which is what the listing confirms by name — meaning the encoder protocol, power lead, and electronic nameplate are pre-engineered for that controller. M0 equal to Mn at 1.27 Nm tells you the motor is being operated inside its continuous envelope across the speed range rather than at the edge of a short-time overload — a clean fit for short-stroke index-and-hold moves rather than sustained high-torque output.
Form factor and what ships in the box
Single-piece packaging, 315.00 x 182.00 x 172.00 mm — a small-format carton consistent with a SH30 servomotor and its hybrid connector, not a palletised drive.
Lifecycle, compliance, and how it lands in the BOM
Lifecycle status is current and the part carries product class C — manufactured to order with no return-for-credit pathway — so the procurement posture is a build-to-order RFQ rather than a stock grab; quantities and lead time are confirmed at quote.